Home › Engineering services › PVsyst solar yield simulation

Engineering services · Solar

PVsyst solar yield simulation

PVsyst energy yield simulations for rooftop, ground-mounted and floating solar — expected annual energy, losses and performance ratio, with the electrical design behind them.

Floating solar PV array at Cheval Blanc Randheli, Maldives (eGearZone AC-side scope for Swimsol)

Overview

A PVsyst simulation estimates how much energy a solar plant will produce at its site, and where energy is lost between the sun and the meter. Developers, resort owners and investors use it to size a plant, compare design options and check a supplier’s yield claims.

We are a simulation and studies team. We combine PVsyst yield simulation with ETAP power system studies, so the AC side — transformers, switchgear, cables and protection — is designed on the same assumptions as the yield.

What the simulation covers

  • Site weather data and irradiance on the module plane
  • Module and inverter selection, string sizing and layout options
  • Shading, soiling, temperature, mismatch, wiring and transformer losses
  • Fixed-tilt, tracker, rooftop and floating array configurations
  • Annual and monthly energy yield, specific yield (kWh/kWp) and performance ratio
  • Comparison of design options, such as module type, tilt or inverter loading ratio

What you receive

PVsyst report

The full PVsyst simulation report with inputs, loss diagram and results.

Summary

A plain-language summary of expected yield, main losses and recommendations.

Electrical link

Optional ETAP load flow, fault level and protection studies for the AC connection.

Where we use it

Resort and island solar in the Maldives, including floating arrays, where every kilowatt-hour displaces diesel. Commercial and utility solar in the UK and Australia, where yield drives the business case and the grid connection.

Frequently asked questions

What information do you need for a PVsyst simulation?

The site location, the proposed layout or roof area, module and inverter types if chosen, and any shading objects. For an existing plant, the as-built design and monitoring data help us calibrate the model.

Can you simulate floating solar?

Yes. PVsyst models floating arrays; we account for the array layout, orientation and the different temperature behaviour on water.

Do you also design the AC side?

Yes. We run ETAP studies for the transformers, switchgear and protection that connect the plant, and eGearZone can supply the substation equipment.

Which software do you use?

PVsyst for energy yield and ETAP for power system studies.

Discuss your project with us

Send us your single-line diagram, specification or RFQ and we will reply with a scope and price.